Beyde Trading Co.,Ltd
Professional For Cable Stranding Machine.
Add to Cart
High-Standard Drum Twister Machine for Stranding and Wrapping of Large Cross-Section Power Cables
1. Application:
This machine is mainly used for the stranding of large cross-section and long power cables and split conductors, as well as the wrapping of non-metallic tape.
2. Main parameter:
| Conductor shape | Round and sector |
| Stranding conductor section | 16mm2 to 300mm2 |
| Max laying OD | Ø20- Ø100mm |
| Laying pitch range | 200-5000mm |
| Pay-off rotation speed | 50r/min |
| Drum take-up rotation speed | 50r/min |
| Rotation caterpillar speed | 50m/min |
| Max haul-off force | 5000kg |
| Non-metallic taping unit max rotation speed | 650r/min |
| Taping unit pitch | 0-200mm(Step-less adjustable) |
| Metallic taping unit max rotation speed | 550r/min |
| Metallic taping unit pitch | 0-200mm(Step-less adjustable) |
| Rotating Pay-off bobbin size | PN1250-PN1600 |
| Rotating Pay-off bobbin size | PN2000-PN2500 |
| Drum type Take-up bobbin size | PN2000-PN2500 |
| Filling rope pay-off specification | Ø400* 22*360mm (20 pcs) |
| Ø630* 52*475mm (4 pcs) | |
| Steel wire armoring pay-off bobbin size | Ø500 |
| Ø1600 Rotating Pay-off Motor power | 15 KW(AC motor) |
| Ø2500 Rotating Pay-off Motor power | 22 KW(AC motor) |
| Taping unit Motor power | 11KW(AC motor) |
| Rotation caterpillar motor power | 18.5kw*2 (AC v motor) |
| Drum type Take-up motor power | 45KW(AC motor) |
Electrical control system
4.13.1 The main control cabinet is operated by touch screen PLC to coordinate and control the various parameter settings of each unit during the cable forming process, and can display the operating speed and parameters of each unit in real time, facilitating timely modification and adjustment of the operating parameters of each unit.
4.13.2. The power supply is a three wire five phase system 380V (± 10%) 50HZ
4.13.3. Working principle of electrical appliances: All driving motors are equipped with encoders, and the encoder feedback runs in the control system. The entire machine is controlled by PLC: the frequency converter, braking unit, air compressor, etc. complete the start-up, jog, normal parking and other operations, ensuring stable synchronization performance.
4.13.4. Safety protection: This machine has multiple safety protections, which can take corresponding protective measures in case of faults or situations that do not meet the normal operation of the equipment, and timely display the fault point on the screen of the main control cabinet, so that operators can make timely and accurate judgments and effective treatment plans.
5.1. Air pressure: 0.6MPa
5.2. Air volume: 1.0m ³/ Min
7. Mechanical and electrical accessories
| 7.1 | Bearing brand | HBR |
| 7.2 | Main drive motor | JIANGHUAI |
| 7.3 | Touch screen | SIEMENS |
| 7.4 | PLC | SIEMENS |
| 7.5 | Inverter brand | INOVANCE |
| 7.6 | Low voltage electrical components | SCHNEIDER |
| 7.7 | Pneumatic component | AIRTAC |
8. Document with machine
| 8.1 | Operation and maintenance manual | 1 pc |
| 8.2 | Foundation diagram | 1 pc |
| 8.3 | Overall diagram | 1 pc |
| 8.4 | Electrical drawing | 1 pc |
| 8.5 | Air circuit layout | 1 pc |
| 8.6 | Lubrication diagram | 1 pc |
| 8.7 | Electrical panel diagram | 1 pc |
| 8.8 | AC driver instructions | 1 pc |
| 8.9 | Bearing list | 1 pc |
9. Operating direction: Right hand, i.e. facing the equipment, pay-off on the left and take-up on the right.
