PN1250 to PN3150 End Shaft Pay-off and Take-up Rack For Cable Manufacturing
1. PN3150 Take-up with traverse wire rack:
- This machine is used for cable extrusion and rotating machine to pull various cables.
- Applicable wire reel specification: PN1250 - PN3150
- Take-up speed: 170m/min max
- Max load capacity: 5 tons
- Traverse wire pitch: 10-30mm stepless and adjustable
- The winding motor adopts a 7.5kw AC motor, and the take-up tension is adjusted through inverter
- End shaft structure, electric clamping, electric lifting
- The speed of winding and winding driven by a separate motor
- With electric operating handle
- Installation without foundation
- Power:380/440V,50- 60Hz, 3 phase, 5 wire, single phase 200-240V.
2. 1600mm Column type pay-off rack (end-shaft type)
- This machine is used for cable extrusion and rotating machine to pull various cables.
- Applicable wire reel specification: PN800 - PN1600
- Tension form: mechanical friction control
- End shaft pay-off type, electric lifting, screw clamping;
- Lifting and clamping device with limit safety protection function
- Installation without foundation
- Power:380/440V,50- 60Hz, 3 phase, 5 wire, single phase 200-240V.
3. 2000mm Column take-up and traverse line rack(end-shaft type)
- Applicable wire reel specification: PN1000 - PN2000
- Max load capacity: 10 tons
- Traverse wire pitch: stepless and adjustable
- Max take-up speed: 65m/min
- The winding motor adopts a 5.5 AC motor, and the take-up tension is adjusted through a inverter.
- End shaft structure, electric clamping, electric lifting
- The speed of winding and winding driven by a separate motor
- With electric operating handle
- Installation without foundation
- Power:380/440V,50- 60Hz, 3 phase, 5 wire, single phase 200-240V.
4. 2500mm Column take-up and traverse line rack(end-shaft type)
- Applicable wire reel specification: PN1250 - PN2500
- Max load capacity: 12 tons
- Traverse wire pitch: 10-60mm stepless and adjustable
- Max take-up speed: 45m/min
- The winding motor adopts a 5.5 AC motor, and the take-up tension is adjusted through a inverter.
- End shaft structure, electric clamping, electric lifting
- The speed of winding and winding driven by a separate motor
- With electric operating handle
- Installation without foundation
- Power:380/440V,50- 60Hz, 3 phase, 5 wire, single phase 200-240V.
| Model | Φ1250 | φ1600 | φ2000 | φ2500 |
| Cable Dia. Max (mm) | 25 | 35 | 50 | 60 |
| Bobbin Flange Dia. (mm) | PN800-1250 | PN 800-1600 | PN 1250-2000 | PN 1600-2500 |
| Bobbin outer width (mm) | 600-950 | 600-1180 | 950-1500 | 1180-2300 |
| Load capacity (T) Max | 4 | 5 | 10 | 12 |
| Take up speed (RPM) | 18.8-47.6 | 18.8 - 47.6 | 6 - 15.5 | 6 - 15.5 |
| Take up motor | JLJ132-40/4 | JLJ132-40/4 | JLJ160-60/6 | JLJ160-60/6 |
| Lift motor (kw) | 1.1 | 1.1 | 1.5 | 1.5 |
| Moving motor (kw) | 0.75 | 0.75 | 1.1 | 1.1 |
| Traverse pitch (mm) | 5-40 | 5-40 | 10-80 | 10-100 |
