Beyde Trading Co.,Ltd
Professional For Cable Stranding Machine.
Add to Cart
48 Bobbins (450 Mm) Rigid Armour Machine( BATCH LOADING – AUTOMATIC)
TYPE Rigid bobbin, pintle type, Wire/ Strip Armour machine
PURPOSE To produce up to Armoured Cables upto 48 Wire/ Strip Armour This machine will be used for Armouring of Power Cables , Control Cables, Instrumentation Cables.
MATERIAL : GI Round Wire / GI Strip/ Steel Round Wire/ Insulated Cores WIRE SIZE : 0.8 mm – 3.5 mm / 4 mm X0.8mm
CABLE SIZES : 8 mm – 50 mm Cables to be Armored. CONFIG. :48 ( Single Cage)
NO. OF BOBBINS :48[rotating ] – 100 Pcs 450 mm Spools to be provided with Machine
CAGES : Single Cage is Frame Type structure supported on spherical roller bearings at both ends. Drive through totally enclosed gearboxes with case hardened and profile ground gears.
BOBBIN SIZE : As per DIN 46397 – 450 MM
BOBBIN HOLDING: Bobbin Clamping is Pneumatic
BOBBIN LOADING :Side Bottom Loading is provided – Motorized
BOBBIN TENSION: Pneumatically operated and controlled through Line Speed Sensor and Proportional Valve. Manual Spring Loaded Tension Control is also provided.
CAGE SPEEDS
(RPM)-MAX : 48 Bobbin – 120 RPM
PAYOFF UNIT : DIN 2200 MM, Self Traversing Portal Type HAUL-OFF :Single Wheel Capstan 2200 MM Dia
LAY LENGTH :100 mm to 1000 mm ( Infinitely Variable through PLC)
TAPING HEAD Heavy Duty Tangential Dual Pad Taping Head & Light Duty Tangential Dual Pad Taping Head.
TAKE-UP 1200 to 2200 mm flange dia X 10,000 kg. Motorised up/down and open/close motion of pintles Reel Rotation & Auto Traverse Unit controlled by AC Drives
ELECTIRCALS
Drive : Main Cage Motor with AC Inverter : 55 KW Capstan Motor with AC Inverter : 37 KW Take-up Motor with AC Inverter : 11 kW Taping Head : 5.5 KW
Traverse Motor with AC Inverter : 1.5 KW Positioning Motor : 2.2 KW
Control : PLC system to monitor and control the line interfaced with Touch Screen. Control Desk and Control Stations throughout the machine
BRAKING TIME
Emergency Stop : 8 seconds
Normal Stop : 20 seconds Cage caliper disc brakes for each cage.
OPERATIONAL HAND Right hand (left to right when viewed from operator side) MACHINE PAINT
Stationary parts : RAL 5015 Rotating parts : RAL 2009 Electrical cabinets : RAL 7035
Electric Power : 415 volts AC ± 10 %, 3 phase, 50 Hz ± 1 Hz. Air : 6 kg/cm2
