Independently Motorized Driving Rigid Stranding Machine JLK400/12+18+24 Spool

Independently Motorized Driving Rigid Frame Stranding Machine JLK400/12+18+24 Spool

Mechanical Features:

1.Each part of the Stranding line is independently motorized without any line shaft.
2.The whole production line energy consumption is much less than line shaft drive type.
3.Simplify the mechanical structure and lower the maintenance difficulty.
4.The stranding cage is divided averagely, it is easy and fast for bobbins loading and unloading.
5.The whole stranding cage of frame structure has front and back dual supporter, and the wire-closing holder can also be pre-forming and compacting for round conductors.
6.Natural wire distribution to prevent wire abrasion damage when stranding.
7.Strong dual-capstan haul-off, the gear tooth ring of the capstan is made of cast steel with big traction capacity to increase the compacting coefficient of the stranded wire.

Electrical / Electronic Features:

1.Single Wire pay-off tension can be adjusted by pneumatic proportion valve imported from Japan to keep constant wire tension from bobbin full to empty. (Hysteresis tension is optional)
2.Equipped with advanced Wire-break detection apparatus, which can control each bobbin directly.
3.The stranding machine will stop immediately once the wire break, especially suitable for Power cable and high compacted crosslinked cable.
4.Each stranding cage along with the dual-capstan haul-off is individual motor drive.
5.The machine power control adopts UPS system to ensure the machine will not be out of control when power failure occurs.
6.SIEMENS PLC + HMI control the whole stranding line. Each production parameter can be set on the touch screen.