7 Wire Tubular Type Stranding Machine 6+1, 12+1, 12+6+1
The Tubular stranding machine is used for high carbon & low carbon steel wire rope, copper & aluminium conductor.
Tubular strander stranding with back twist, for 1+6 Bobbin, 1+12 Bobbin, 1+18 Bobbin & 1+6+12 Bobbin copper / aluminium round & compact conductors and steel wire stranding.
We also customise this tubular type stranding machine in accordance with customers’ requirements.
The stranding machine is designed with 1+5 Bobbin, 1+6 Bobbin, 1+8 Bobbin, 1+10 Bobbin, 1+12 Bobbin, 1+18 Bobbin Cage or accoding to customers' requirements.
Bobbin: 200 mm, 250 mm, 315 mm, 400 mm, 500 mm, 630 mm, 800 mm, 1000 mm, 1250 mm DIN 46397 Standard / Modified.
Tubular stranding machine, Cages supported on good bearing on both ends. The big main bearing is pump-oil forced lubrication bearing.
The tubular cage is annealed, which will reduce the internal stress and increase service life.
High efficiency and speed, low noise, long life. 200 / 1+6 Cage max speed 1400 RPM. 200 / 1+18 Cage maxspeed 900 RPM. 1250 / 1+5 Cage max speed 100 RPM.
Bobbins locked with mechanical pintles: one is movable and one is fixed, or Bobbin is fasten on the axis by latch.
Different braking device for bobbin tensioning.
Disk type Pneumatic brake for Cage.
PLC Equipped, optional.
Specification
Model (Tubular Stranding Machine)
JGG-200
JGG-315
JGG-400
JGG-500
JGG-630
Diameter
Copper
φ0.4-0.9 mm φ0.8-1.8 mm φ1.2-2.6 mm φ1.4-4 mm φ2-7 mm
Aluminum
φ0.9 mm φ1.8 mm φ1.8-2.6 mm φ1.8-4 mm φ2-7 mm
Maximum stranded conductor OD
φ3 mm φ5 mm φ7 mm φ10 mm φ12 mm
Stranding Pitch
6 Bobbin Stranding Cage
10-76 mm 20-152 mm 37-281 mm 44-338 mm 82-620 mm
12 Bobbin Stranding Cage
10-76 mm 20-152 mm 37-281 mm 44-338 mm 82-620 mm
18 Bobbin Stranding Cage
10-76 mm 30-228 mm 44-334 mm 44-338 mm 82-620 mm
Rotating Speed
6 Bobbin Stranding Cage
1400 r/min 1000 r/min 600 r/min 600 r/min 400 r/min
12 Bobbin Stranding Cage
1200 r/min 900 r/min 600 r/min 500 r/min 300 r/min
18 Bobbin Stranding Cage
900 r/min 600 r/min 450 r/min 400 r/min 230 r/min
Capstan
Capstan Wheel Diameter
φ300 mm φ500 mm φ600 mm φ800 mm φ1000 mm
Maximum Haul-off Force
1T 2T 3T 5T 5T
Motor Power
11 KW 18.5 KW 22 KW 30 KW 37 KW
Bobbin Size
200 mm 315 mm 400 mm 500 mm 630 mm
Center Payoff Bobbin
200 mm 315 mm 400 mm 500 mm 630 mm
Take-up Bobbin
630 mm 800 mm 1250 mm 1600 mm 2000 mm
